Favorites

How to Set Up HP Envy Driver for Windows

The printer is very easy and simple to set up. Using the items and configurations you already have with it, you can already set up a printer and use it immediately. Furthermore, you can also set up some printers just by connecting the power cable to the PC and power supply.

Basic Steps on How to Set Up your Hp Printer

But today, we are going to talk about the famous HP Envy Driver and how to set it up for work. First thing first, let’s discuss about the basic steps on setting up the printer for your Windows PC.

  1. Remove the box

Before starting off all the settings and configurations, the first step to set up a printer to your PC, basically all devices, is to remove the printer from the box. Free also the printer from the various unnecessary pieces that are still stuck into it, like tapes and styrofoam. However, keep the guiding books and other documents you may need later on.

  1. Connect the cable

In order to make the printer work, make sure you have connected all the essential cables to either the printer, PC, or both. Plug one end into the PC, power strip or outlet, and the other end into the printer itself. Make sure you have connected the right cable into the right ends, and make sure to connect them all before using the device.

  1. Read the instruction

Remember when we told you to keep the guidance books? It will necessary just now because you might want to check on some things and make sure you have done the right steps up until now through the instructions. See there, whether you need to download or install something before connecting the device to the PC, and some other basic things.

  1. Install a software

If it is needed, install necessary and relevant software to your PC first before starting to configure the setup for the printer. Usually, what software and what steps on how to install it well are on the instruction books.

  1. Turn the printer on

After pressing the power button of the printer, the USB will help to connect it to the PC. And when a new device, in this case, your printer HP Envy Driver, your PC will instantly recognize it. However, if it doesn’t work as expected, you can go to Control Panel – Hardware and Sound – Printers, then click the menu Add a printer to make sure your printer is connected properly to the PC.

  1. Turn the printer off

Don’t forget to press the power button again on the printer if you’re not needing it at the moment. Best to keep its condition optimum by turning it off while not on use.

HP Envy Driver is the newest series of HP Printers that you should really check on. It includes six original series and an all-in-one. If the steps above are not working for this device nor on your PC, you can always visit the HP official homepage. There, you can recheck on the preparation, supported printer software, and configuration for your Windows PC.